Synesso MVP Hydra

60
PROGRAMMING
Menu Level 3: Return
Line 2 allows the operator to return to the rst (operaons) level menu.
Line 3 allows the operator to return to the second (sengs) level menus.
To cycle to the next screen, press the down buon.
Shot mer display brightness can be adjusted on this screen. Use these sengs to bring all shot mers to a
uniform brightness. Values range from 0-15. Current factory default seng is 3. Lower sengs help to pre-
serve the lifemes of the displays.
To cycle to the next screen, press the down buon.
Menu Level 3: Shot Timer Display Brightness