index
106
SYNRAD OEM v40 Operator’s Manual Version 4
maintenance, 4-2–4-5
model numbers, 1-2
mounting, 1-6–1-7
nomenclature, 1-2
optical setup, 3-3–3-4
packing/unpacking, 1-3
safety features, 8
storage/shipping, 1-3, 4-3
technical overview, 3-2–3-4
troubleshooting, 4-6–4-17
Firestar base plate 1-6
mounting, 1-6–1-7
Firestar Series v40 laser 1-4, 1-5
Five second delay 8, 2-2, 2-3, 2-5, 2-7, 2-9,
2-11, 3-10, 3-11, 3-14, 3-15, 3-17, 3-23,
3-24, 3-25, 4-9, 4-11, 4-12, 4-13, 4-14,
4-16
Flowchart
laser start-up, 4-7
Focusing optics 3-4
Functional block diagram 4-8
Fuse 1-4, 1-5, 2-3, 2-5
replacement, 4-16
G
Gas purity specications 3-4
Gated operation 3-8
General specications 3-26–3-27
v40, 3-26–3-27
H
Hazard information 1–3
additional laser safety information, 3
disposal, 3
general hazards, 1–3
label locations, 4
other hazards, 3
terminology, 1
I
Indicators and controls 8, 2-2–2-6
Initial start-up 2-7–2-12
with a UC-2000 Controller, 2-7–2-9
without a UC-2000 Controller, 2-10–2-12
Input circuit
equivalent schematic, 3-16
pin descriptions, 3-14–3-15
sample diagrams, 3-19–3-20
specications, 3-16
Input Common 3-11, 3-14, 3-15, 3-20, 3-24,
3-25, 4-14, 4-15
description, 3-15
Input/Output signals 3-12–3-21
Input signals 3-14–3-16
customer-supplied interlock, 3-19
customer-supplied interlock, negative volt-
age, 3-19
Input Common, 3-11, 3-14, 3-15, 3-20,
3-24, 3-25, 4-14, 4-15
multiple PLC driven inputs, 3-20
PLC driven interlock signal, 3-19
PWM Input, 2-10, 3-11, 3-14, 3-16
PWM Return, 2-10, 3-10, 3-14
Remote Interlock, 1-17, 2-8, 2-10, 3-10,
3-14, 3-16, 3-19, 3-25, 4-12
Remote Reset/Start Request, 2-9, 2-11,
3-10, 3-14, 3-16, 3-24, 4-11, 4-12
Shutter Open Request, 1-17, 2-8, 2-10,
2-11, 3-11, 3-15, 3-16, 3-17, 3-24, 3-25,
4-9, 4-12, 4-13, 4-17
Inspections
daily, 4-2–4-3
incoming, 1-3
Integrating safety features 3-24–3-25
keyswitch functions, 3-24–3-25
remote interlock functions, 3-25
shutter functions, 3-25
Interlock. See Remote Interlock
Interlock Open output 3-11, 3-17, 3-25, 4-9,
4-10, 4-14, 4-16
description, 3-17
Introduction 1-2
Inventory 1-4–1-5
contents description, 1-5
ship kit contents, 1-4
K
Keyswitch 8, 2-3, 2-8, 2-9, 2-11, 3-14, 3-24,
3-25, 4-9, 4-11, 4-12
Keyswitch faults
resetting, 4-11–4-12
L
Label locations 4
Lase (LASE) indicator 8, 2-3, 2-5, 2-9, 2-11,
3-10, 3-17, 4-9, 4-10, 4-16