10
Synrad Firestar OEM v30 reference guide
Agency compliance (cont.)
When integrating SYNRAD’s OEM v30 lasers, the Buyer and/or integrator of the end system is responsible for meeting all
applicable Standards to obtain the CE mark. To aid this compliance process, SYNRAD’s testing program has demonstrated
that OEM v30 lasers comply with the relevant requirements of 2004/108/EC, the Electromagnetic Compatibility Directive,
as summarized in Table 2 below.
Table 2 European Union Directives
Applicable Standards/Norms
2004/108/EC Electromagnetic Compatibility
2006/95/EC Low Voltage Directive
2011/65/EU RoHS Directive
EN 61010-1:2001 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use - Part 1: General Requirements
EN 61000-6-4:2007 Radiated Emissions, Group 1, Class A
EN 61000-6-4:2007 Conducted Emissions, Group 1, Class A
EN 61000-6-2:2005 Electrostatic Discharge Immunity
EN 61000-6-2:2005 RF Electromagnetic Fields Immunity
EN 61000-6-2:2005 Electrical Fast Transient/Burst Immunity
EN 61000-6-2:2005 Conducted RF Disturbances Immunity
After a product has met the requirements of all applicable EU Directives, the product can bear the official compliance mark
of the European Union as shown in Figure 2 and a Declaration of Conformity is provided for the compliant component.
Figure 2 European compliance mark