Sys Tec Electronic USB-CANmodul - Device Number Allocation; Figure 2: USB Configuration Tool UCAN Config

USB-CANmodul
12

SYS TEC electronic GmbH 2001 L-487e_6
If the installation was not successful, check the installation steps as
described above and try to re-install.
2.1.4 Device Number Allocation
With the help of device number allocation, it is possible to use more
than one USB-CANmodul simultaneously on the host-PC. The
device number identifies the individual USB-CANmodul.
•
Start the configuration utility using the Windows Start button and
browse to Programs \ USB-CANmodul Utilities \ UCAN Config.
•
This utility lists the USB-CANmodul’s by serial number and
device number. The device number is set to zero by the
manufacturer. It is not necessary to change this value if only using
one USB-CANmodul. We recommend to accept the default value
for the first installation.
Figure 2: USB Configuration Tool UCAN Config
•
To exit the UCAN Configuration utility click on the Close button.