Sys Tec Electronic USB-CANmodul - Starting Pcanview (USBCAN); Figure 4: Dialog Box with Hardware Configuration

USB-CANmodul
14

SYS TEC electronic GmbH 2001 L-487e_6
2.1.6 Starting PCANView (USBCAN)
The included program PCANView (USBCAN) is a CAN bus monitor
for Windows.
•
Start the utility program using the Windows Start button and
browse to Programs \ USB-CANmodul Utilities \ PCANView
(USBCAN). It is recommended that you drag the PCANView
(USBCAN) icon onto the desktop of your PC. This enables easy
start of this utility program by double-clicking on the icon.
•
The USB-CANmodul window will appear:
Figure 4: Dialog Box with Hardware Configuration
•
Select the baudrate of your CAN network in the Baudrate box and
the Device Number. The entry any selects the USB-CANmodul
that is found first by Windows. Click on the OK button to enable
these settings.
•
A new window PCANView – Connect to net will appear.