USB-CANmodul
24
SYS TEC electronic GmbH 2001 L-487e_6
3.1.2
PCANView (USBCAN) for Windows
The Windows utility
PCANView (USBCAN)
can be used to display
CAN messages transmitted via the CAN bus.
•
Start the utility program using the Windows Start button and
browse to Programs \ USB-CANmodul Utilities \ PCANView
(USBCAN). It is recommended that you drag the PCANView
(USBCAN) icon onto the desktop of your PC. This enables easy
start of this utility program by double-clicking on the icon.
•
The USB-CANmodul window will appear:
Figure 9: Dialog Box with Hardware Configuration
•
Select the baudrate of your CAN network in the Baudrate box and
the Device Number. The entry any selects the USB-CANmodul
that is found first by Windows. Click on the OK button to enable
these settings.
•
A new window PCANView – Connect to net will appear.
To Next Page
Loading...