USB-CANmodul
22
SYS TEC electronic GmbH 2001 L-487e_6
The device number from column three is transferred into the input
field at the lower left corner as soon as a module is chosen from the
list by a mouse click. The device number can then be changed within
this input field. Values from 0 to 254 are valid. Click on the Change
button to program the new value into the USB-CANmodul. Invalid
values will be recognized by the program and not be accepted.
A Warning message box will appear if more than one module has an
identical device number. This is not an error, however, the
application always uses the first module with the device number. This
means if two modules with the same device number are present, the
one connected first or registered first through Windows will be
addressed.
If n.c. appears as the serial number or device number, it means that
there is no USB-CANmodul for that module number.
Figure 8: UCAN Config Utility
To Next Page
Loading...