USB-CANmodul
26
SYS TEC electronic GmbH 2001 L-487e_6
Figure 11: PCANView (USBCAN) with Messages
This screen is divided into two sections: Receive and Transmit
•
Receive: monitors CAN signals that are received from a node
•
Transmit: monitors CAN signals sent from the host-PC to the
CAN network via the USB-CANmodul
Receive Section
The Receive section provides the following information:
•
Message: identifier of the CAN message, hexadecimal format,
ranging from 0 to 7FFh for 11-bit identifiers and from
0 to 1FFFFFFFh for 29-bit identifiers
•
Length: data length code of the message (ranges from 0 to 8)
•
Data: values of the messages’ data bytes (up to 8) or the text
Remote request, if a remote frame has been received
•
Period: period of time between the reception of the last two
messages with this identifier
•
Count: number of messages received with this identifier (no
remote frames) since last user reset
To Next Page
Loading...