USB-CANmodul
34
SYS TEC electronic GmbH 2001 L-487e_6
UcanDeinitHwConnectControl
Syntax:
BYTE STDCALL UcanDeinitHwConnectControl (void);
Usability:
DLL_INIT
Return value: Error code of the function.
USBCAN_SUCCESSFUL
Description:
This function finishes the supervision of the recently connected or
disconnected USB-CANmoduls. This function must be called after
the function UcanInitHwConnectControl () was called within an
application and before closing this application.
To Next Page
Loading...