Sys Tec Electronic USB-CANmodul - Page 4

USB-CANmodul
2

SYS TEC electronic GmbH 2001 L-487e_6
Index of Figures and Tables
Figure 1: Device Manager with the USB-CANmodul...............................11
Figure 2: USB Configuration Tool UCAN Config....................................12
Figure 3: Pin Layout of the DB-9 Connector.............................................13
Figure 4: Dialog Box with Hardware Configuration.................................14
Figure 5: Dialog Box Message Filter Configuration .................................15
Figure 6: PCANView (USBCAN) Main Window.....................................16
Figure 7: Location and Numbering of the Jumpers ...................................18
Figure 8: UCAN Config Utility.................................................................22
Figure 9: Dialog Box with Hardware Configuration.................................24
Figure 10: Dialog Box Message Filter Configuration .................................25
Figure 11: PCANView (USBCAN) with Messages....................................26
Figure 12: Software State Diagram..............................................................30
Table 1: States of the LEDs on the USB-CANmodul ..............................17
Table 2: Pinout of the DB-9 Connector....................................................17
Table 3: Configuration of the CAN Power Supply Jumpers....................19
Table 4: Software State Functions............................................................31