Sys Tec Electronic USB-CANmodul - Page 66

USB-CANmodul
64

SYS TEC electronic GmbH 2001 L-487e_6
UcanHandle_p: USB-CAN handle of the USB-CANmodul where the
event occurred. This handle is returned with the
function UcanInitHardware ().
bEvent_p: Event which occurred.
USBCAN_EVENT_INITHW = 0
USBCAN_EVENT_INITCAN = 1
USBCAN_EVENT_RECEIVE = 2
USBCAN_EVENT_STATUS = 3
USBCAN_EVENT_DEINITCAN = 4
USBCAN_EVENT_DEINITHW = 5