Systemline S4.3 - 6.36 VCR;DVD;Tuner 2;CD 2 (Source 4) Commands

PAGE
Section 6 • Operation
Tuner 2
(- Preset): This selects the next
PRE-PROGRAMMED station
LOWER in frequency than the
one playing.
(Preset +): This selects the next
PRE-PROGRAMMED station
HIGHER in frequency than the
one playing.
(Favourite station): This selects
the first station (Preset No 1)
programmed into the tuner’s
memory.
No Function
CD 2
(Track skip back): This reverts to
the beginning of the track being
played. Two quick pushes select
the previous track.
(Track skip forward): This
advances the CD to the next
track.
(Stop disc): This stops the CD.
(Next disc): This advances the
CD to the next disc (when
appropriate).
Satellite or Cable
(- Channel): This changes to a
lower channel number.
(Channel +): This changes to a
higher channel number.
No Function
No Function
6.36 VCR/DVD/Tuner 2/CD 2
(Source 4) Commands
VCR
(Fast rewind / scan back): This
rewinds the tape, with scan if
the tape is being played when
the function is selected.
(Fast forward / scan forward):
Same as above except in the
forward direction.
(Stop VCR): This stops the VCR.
(VCR Ch+): This advances the
VCR to the next channel.
DVD
(Scan back): This scans back
through the disc program.
(Scan forward): This scans
forward through the disc
program.
(Stop disc): This stops the DVD.
No Function
34