TAC AB, 2001-08-08 0-004-7506-4 (EN), 3 (36)
TAC Xenta OP Handbook Foreword
Foreword
Welcome to the manual of TAC Xenta OP, version VMX 3.2 and
higher.
Should you discover errors and/or unclear descriptions in this manual,
please contact your TAC representative.
You may also want to send an e-mail to helpdesk@tac.se.
This edition, -4, applies to TAC Xenta OP version VMX 3.2 or later.
The procedure for de-installation of the OP has been clarified and put
in a separate section, 2.7.
The possibility to select which unit system (SI or US Imperial) is used,
when connecting to TAC Xenta 100, is now described in section 3.2.
To Next Page
Loading...