EasyManuals Logo

T Scale DR Series User Manual

T Scale DR Series
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
SECTION 4 BATTERY CHARGING
1 Please use the special charger to charge battery, use other types
charger will be danger.
2 Please assure you AC power meet the rating of charge.
3 When the battery needs charging a symbol on the weight display will
turn on. The battery should be charged when the symbol is on. The
scale will still operate for about 30 minutes after which it will
automatically switch off to protect the battery.
4. The battery should be charged for 12 hours for full capacity.
5. Just on the right side of the display, these is an LED to indicate the
status of battery charging. When the scale is plugged into the mains
power the internal battery will be charged. If the LED is green the
battery has a full charge. If it is Red the battery is nearly discharged
and yellow indicates the battery is being charged.
6. As the battery is used it may fail to hold a full charge. If the battery life
becomes unacceptable then contact your distributor.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the T Scale DR Series and is the answer not in the manual?

T Scale DR Series Specifications

General IconGeneral
BrandT Scale
ModelDR Series
CategoryScales
LanguageEnglish

Related product manuals