www.scalesearch.co.uk
SECTION 3 OPERATION
3. 1 GENERAL INSTRUCTION
1．Please read this manual carefully before you operate the hanging scale.
2. When battery goes low, the BATT icon will be display. It is the time to charge
the battery with the special charger.
3．If you will let DR hanging scale deactivate for a long time, please note you
also need change the battery every three months
3. 2 BASIC OPERATION
3.2.1 Power on and off
Please press ON/OFF key before you operate this scale, and press
ON/OFF
key again after you operate this scale
3.2.2 Zero the scale
When there is no item on the scale but reading is not zero, press the
ZERO key to make re-zero reading.
3.2.3 Reading lock
When reading is not stable, you can use HOLD key to lock reading, so
you can read easily, after you read, press HOLD key again to return
normal weighing mode.
3.2.4 Overload Warning
Please do not add item that is over the maximum capacity. When
reading“ --ol-” , remove the item on the hook to avoid damage to the
load cell.
To Next Page
Loading...
Need help?
General
