SECTION 7 ERROR CODES
ERROR
CODES
DESCRIPTION RESOLUTION
- - ol -
Over range
Remove weight from the scale.
If the problem persist contact your dealer for
assistance.
Err 4 Zero Setting Error
The scale was outside the normal auto zero
setting range (4% of capacity), please check the
hook is empty, or calibrate zero point again.
Err 5 Keyboard Error
Keyboard short, please check the key wire
whether the key have mechanical problem
Err 6 A/D out of range The values from the A/D converter are outside the
normal range. Remove weight from the scale if
overloaded, make sure the pan is attached.
Indicates the load cell or the electronics may be
faulty.
If the problem persist contact your dealer for
assistance.
Err 9 Press zero or tare
key when unstable
Wait for stability
Err17 Tare out of range
Ba lo Battery low Charge battery immediately
To Previous Page
Loading...
Need help?
General
