SECTION 2 KEYBOARD AND DISPLAY
2. 1 DESCRIPTION OF KEYS
ON/OFF: power switch, use this key to turn on and turn off scale
ZERO: re-zero key, use this key to return zero reading, when in setting
mode, use this key to sure setting.
TARE: use the tare key to subtracts tare values and changes the scale
from gross mode (no tare) to net mode. In the setting mode, this key
is used to increase the value.
HOLD: reading lock key, use this key to lock reading, in calibrate mode,
use this key to change decimal point.
UNIT: Press the key, the scale can to select units. It has two units, kg and
lb.
When you weigh, press this key, you can see the conversion of the
units.
when in setting mode, use this key to escape setting
2.2 Remote controller key function(30kg without this function):
1.TARE 2. ZERO 3.UNIT 4.HOLD
2.3 DISPLAY
BATT.: battery indicator. The battery should be
charged when the symbol is on. The scale will
still operate for about 30 minutes after which it will automatically switch off
to protect the battery.
Zero: zero indicator, when this indicator on, scale in zero point.
Tare: tare indicator, this indicator on means current weight is the net weight,
which has been subtracted the tare values. you can press the TARE key to
return gross weight mode.
Hold: lock indicator, when this indicator on, scale in reading data lock
mode, you can press HOLD key to return normal weighing mode
Kg.: weighing unit, kilogram.
lb.: weighing unit, pound.
To Next Page
Loading...
Need help?
General
