Need help?Do you have a question about the T Scale RWP and is the answer not in the manual?
General| Brand | T Scale |
|---|---|
| Model | RWP |
| Category | Measuring Instruments |
| Language | English |
Describes the physical appearance and layout of the weighing indicator.
Provides the physical measurements and dimensions of the weighing indicator unit.
Instructions for receiving the scale, checking for damage, and verifying included components.
Steps for physically setting up the weighing indicator and connecting it to power.
Details on connecting load cell cables to the indicator's terminal.
Procedures for connecting the power adaptor and charging the internal battery.
Explains the symbols and segments of the weighing indicator's digital display.
Details the function of each button on the weighing indicator's control panel.
Instructions for turning the indicator on/off and setting the zero point.
Procedure for taring the scale to exclude the weight of a container.
Basic steps for performing a standard weighing operation.
How to configure and use the check weighing feature.
Configuring upper and lower limits for weighing operations.
Steps to access the indicator's menu and navigate its options.
Performing manual accumulation of weighing values.
Enabling and using the automatic accumulation feature.
Using the indicator for weighing vibrating loads, suitable for animals.
Capturing max weight and adjusting display backlight.
Configuring auto power-off timer.
Using the indicator for subtraction weighing applications.
Explains how to navigate and operate within the indicator's menu system.
A table detailing various configurable parameters and their sub-menus.
Accessing the programming and calibration modes.
Setting upper and lower limits for weighing.
Managing accumulation memory for printout and clearing.
Configuring weighing units and their usage.
Configuring the layout and content of printed weight data.
Selecting the type of printer connected to the indicator.
Configuring automatic zero tracking and settings.
Defining the acceptable range for zero adjustments.
Setting A/D speed and display decimal point formats.
Configuring increment steps and scale capacity.
Options for calibration and local gravity adjustment.
Selecting specific weighing modes like animal or peak hold.
Step-by-step guide for performing a standard calibration.
Steps to access calibration functions and enter passwords.
Procedure to calibrate the scale for linearity across its range.
Adjusting zero point and loading calibration weights.
Calibrating the scale to compensate for drift over time.
Technical details of the RS-232 data output.
Pin configuration for RS-232 connector and 9-pin air connector.
Format of data transmitted continuously via RS-232.
Explains different printout formats available for data.
To Next Page
