118 Part F: Configuring Channels © Tait Electronics Limited December 2007
Microphone The upper drop-down list specifies the microphone’s line out audio path.
The lower drop-down list specifies the microphone’s transmit audio path.
Tip: Select Tx A or Tx B so that a technician can use a microphone
to transmit using the base station.
Transmit Path
In the Add or Edit Channel Profile dialog box, Signal Path tab, the lower area
lets you configure transmit paths. A transmit path connects received audio or a
line input to the transmitter.
Filter The Filter drop-down lists let you select an audio filter for each enabled
transmit path. The options are the same as for the receive paths, except that
Pre-emphasis
filters replace the de-emphasis ones.
Option Description
None The microphone has no line audio path.
Balanced Connects the microphone to the balanced line output.
Unbalanced Connects the microphone to the unbalanced line output.
All Connects the microphone to both the balanced and
unbalanced line outputs.
Option Description
None The microphone has no audio path to the transmitter
Tx A Connects the microphone to the transmitter using the Path A
filter
Tx B Connects the microphone to the transmitter using the Path B
filter
To Next Page
Loading...
