TB8100 Service Kit User’s Manual Working With Base Station Configurations 49
Working With Base Station Configurations
Base stations are programmed with many configuration settings. Using the
Service Kit, you can view these settings, change them, and then program them
into the base station. You can also create a new configuration from a template
and save a configuration to a file.
Q Configuration works differently from other Service Kit functions. Once you
are logged on, you can monitor the base station but you can’t yet view its
configuration. First you must click the Read icon, which instructs the base
station to supply its configuration information.
Q Programming the base station with a new configuration can only be done
when the base station is in Standby mode.
Q You can obtain configuration information from a base station, from a
configuration file
, or from a configuration template.
Figure 1: Obtaining Configuration Information
Ways of working
with
configurations
There are several different methods that you can use to create and maintain base
station configurations.
Q Read the base station’s configuration, modify it, and program the changed
configuration back into the base station.
Q Create a template from a base station’s configuration and use it to create
configurations for other base stations.
Q Export one base station’s channels or task list and import it into other base
stations.
File > New
Base Station
Read
Channels
file
Existing Base
Station
Task Items
file
Program
On-Screen
Configuration
Information
Templates
Configurations
File > Save
File > Open
Import
Import
Export
Export
File > Save
as Template
To Next Page
Loading...
