TB8100 Service Kit User’s Manual Glossary 233
system flag
System flags are binary indicators that are read and set by Task
Manager. Generally, they are used to disable or enable
configured base station functions.
system interface
The system interface is the set of inputs to and outputs from the
base station (excluding power and RF), provided by a board
inside the reciter. A range of different boards are available for
different applications.
T
TB8100 Base Station A Tait TB8100 base station consists of the equipment necessary
to receive and transmit on one channel. Generally, this means a
reciter, a PA, and a PMU. Often abbreviated to TB8100 or base
station.
Talk Through
Repeater
A TB8100 is a talk through repeater when its audio path is
configured to pass the audio it receives on to the transmitter.
Task Manager
Task Manager is a part of the TB8100 base station firmware that
carries out tasks in response to inputs. These tasks are formulated
using the Service Kit.
template file
A template file contains configuration information that can be
used to create a new base station configuration. Template files
have the extension *.t8t.
transmit lockout
The transmit lockout feature prevents the base station from
transmitting for a time once the transmit timer has expired. It is
designed to prevent users from monopolizing the base station.
U
Unbalanced line
An unbalanced line has one wire earthed. It is typically used for
short connections, for example, between a base station and a
repeater on the same site. The system interface identifies the
wires of unbalanced lines with Rx audio, Tx audio, and Audio
Ground. Audio Ground is common to line in and line out.
To Next Page
Loading...
Need help?
General
