Tait tm8200 - Page 124

124 TMAA10-03 and TMAA10-06 High-Power Remote Speakers TM8100/TM8200 Accessories Manual
© Tait Electronics Limited August 2005
Power Connector
Wiring
Insert the remote speaker receptacles into the power connector socket, as
shown in the diagrams below.
Note The positive remote speaker wire has a white stripe.
With the TMAA10-03 remote speaker (25W radio), insert the
positive remote speaker wire into the position nearest to the red
wire.
With the TMAA10-06 remote speaker (40W/50W radio),
insert the positive remote speaker wire into the upper position
(marked “3”).
.
.
Figure 16.1 Power connector wiring of the TMAA10-03 remote speaker
Figure 16.2 Power connector wiring of the TMAA10-06 remote speaker
power
connector
remote
speaker cable
speaker +
speaker –
+13.8V
(red)
ground
(black)
power
connector
remote
speaker cable
speaker – (to pin 2)
speaker + (to pin 3)
+13.8V
(red)
ground
(black)