Tait TM9400

28 General Specifications TM9400 Specifications Manual
© Tait Limited November 2016
Radio Body
Connectors
RF
Power
Auxiliary
Internal options
50Ω BNC or mini-UHF
Between 10.8 and 16V DC, negative ground
- supply voltage ripple: <10mV
pp
(8kHz to 200kHz)
- noise: <500mV
pp
(800Hz to 8kHz) or 100mV
pp
if connected directly to a battery
15-way D-range
a
18-pin Micro-MaTch connector
b
Speaker Optional external (using power connector), maximum power 10W into 4 Ω,
balanced load configuration
Microphone Optional auxiliary (e.g. handsfree)
On-off Optional external (e.g. ignition sense)
a. Includes 1 serial, 3 input, 4 I/O, 1 audio tap in, 1 audio tap out.
b. Includes 1 serial, 7 I/O, 1 audio tap in, 1 audio tap out.