TM9400 Specifications Manual Introduction 5
© Tait Limited November 2016
Regulatory Requirements and Industry Standards
Regulatory
Requirements
TM9400 radios meet and exceed the following regulatory requirements
(where applicable):
■ CFR 47
■ AS4295-2004
■ EN 300 086-1
1
■ EN 300 113-1
1
■ EN 300 219-1
1
■ EN 301 489-1
1
■ EN 60950-1
1
■ RSS-119
1
A regulatory requirement issued by ETSI. ETSI requirements do not
apply to radios operating in the 700/800/900MHz frequency bands.
Industry Standards TM9400 radios also meet and exceed industry standards that include:
■ Relevant sections of TIA-102-CAAB-D (Land Mobile Radio
Transceiver Performance Recommendations, Project 25 - Digital Radio
Technology, C4FM/CQPSK Modulation)
■ Relevant sections of TIA-102.CCAB-A (Project 25 Two-Slot Time
Division Multiple Access Transceiver Performance Recommendations)
■ Relevant sections of TIA-102.BCAF (Project 25 Trunked TDMA Voice
Channel Conformance Profiles)
■ Relevant sections of TIA-603-D (Land Mobile FM or PM
Communications Equipment Measurement and Performance
Standards)
■ P25-CAB-CAI_TEST_REQ (Project 25 Compliance Assessment
Program, Baseline Common Air Interface Testing Requirements)
■ MIL-STD 810 G (Environmental Engineering Considerations and
Laboratory Tests, see also "Environmental" on page 30)
TIA standards are adopted by TIA in accordance with the American
National Standards Institute (ANSI) patent policy.
For applicable Ingress Protection (IP) ratings and military standards, as
well as details of the applicable Electrostatic Discharge (ESD) standard,
see "Environmental" on page 30.
Quality Assurance Tait is an ISO9001: 2000 and ISO14001: 2004 certified supplier.
Vocoder TM9400 radios use AMBE+2™ voice coding technology.
To Next Page
Loading...
Need help?
General
