TM9400 Specifications Manual Introduction 9
© Tait Limited November 2016
RF Output Power
TM9400 mobile radios are available with >25W and 25W RF output
power. These RF output power options are implemented by different main
boards in the radio body and mechanically different radio bodies. For
information on which control head is currently available with each radio
model, contact your regional Tait office.
The >25W radio is available in the following frequency bands:
■ B1 (50W)
■ H5 (40W)
■ H7 (40W)
■ K5 (30W for 757–806 MHz, 35W for 806–870MHz)
The 25W radio is available in the following frequency bands:
■ B1
■ H5
1
■ H7
1
Product Codes
The product code (T02-xxxxx-xxxx) printed on a radio label identifies both
the radio model and the configuration of that particular radio. For a detailed
explanation of product codes and how to interpret them, please refer to the
TM9300/TM9400 Service Manual (MMB-00004-xx).
1. Radios approved for operation on the Australia and New Zealand Citizens
Band have a maximum RF output power of 5W.
To Next Page
Loading...
