Tait TM9400

36 General Specifications TM9400 Specifications Manual
© Tait Limited November 2016
Control Head Only
Notice The standard control head configurations assume the use of a
standard microphone. If the keypad microphone is used, add 60mA to
the figures listed below.
Graphical Control
Head - Local
Configuration
Graphical Control
Head - Remote
Configuration
The remote configuration comprises the remote body interface, control
head interface box (radio powered), remote control head interface, and the
control head itself.
Hand-held Control
Head - Remote
Configuration
The remote configuration has the hand-held control head connected
directly to the remote body interface. The remote interface kit is not used.
Backlighting off, standby, LCD heater off 25mA
Backlighting on high, standby, LCD heater off 50mA
Backlighting on high, standby, LCD heater on 295mA
Backlighting on high, standby, LCD heater off 75mA
Backlighting on high, standby, LCD heater on 320mA
Backlighting on high, full speaker audio, LCD heater off 540mA
Backlighting on high, full speaker audio, LCD heater on 785mA
Backlighting off 30mA
Backlighting on high 50mA