Name: Tait TP9300
Brand: Tait
Rating: 4 (1 reviews)

To Next Page

To Previous Page

114 Operating in trunked mode

To make a call to a workgroup:

1 Select the required zone. See "Selecting a zone"

on page 113.

2 Select the required workgroup. See "Selecting a

workgroup" on page 113.

3 Press the PTT key, and a call to that workgroup is

made.

Dialing a workgroup call

This feature is only available for radios with

alphanumeric keys.

It may be possible to dial workgroup calls, if you know

the number associated with the workgroup.

1 Dial w, where w is the number of the workgroup.

If your workgroup call number is the same as a call

to another radio, then you need to dial a leading 0.

For example, dial 23# to call radio 23 and dial 023#

for workgroup call number 23.

2 Press Send or the # or PTT key.

While the call is being setup, you can cancel the

call by pressing Cancel.

Selecting the homegroup

Your ‘homegroup’ is the workgroup in which your

radio usually operates. To return to your homegroup

at any time, you may be able to use the main menu, or

use a function key.

SendClear

Other manuals for Tait TP9300

Questions and Answers:

Need help?

Do you have a question about the Tait TP9300 and is the answer not in the manual?

General