Tait TP9300 User Manual

Operating in conventional mode 69
6 Operating in
conventional mode
This section explains how to operate your radio on a
conventional network (digital and analog).
This section covers:
■ Selecting a zone
■ Selecting a channel
■ Selecting a scan or vot-
ing group
■ Understanding talk-
groups
■ Making a call
■ Making an individual
call
■ Making a preset call
■ Making a call using the
address book
■ Making a local call
■ Making a DTMF patch
call
■ Making an emergency
call
■ Setting your status (on
analog channels)
■ Sending and receiving
status messages
■ Sending and receiving
text messages
■ Checking the queue
■ Call alert
■ Radio check
■ Radio monitor
■ Radio inhibit and unin-
hibit
■ Resending calls auto-
matically
■ Transmitting at low
power
■ Ending active calls
■ Using monitor and
squelch override
(on analog channels)
■ Bypassing the repeater
(on analog channels)
■ Receiving a call
■ Using the radio in dif-
ferent repeater areas
■ Scanning a group of
channels

Tait TP9300 Specifications

General

IP Rating	IP67
Frequency Bands	VHF: 136-174 MHz, UHF: 400-470 MHz
Power Output	VHF: 5W; UHF: 4W
Battery Life	Up to 14 hours
Channel Spacing	12.5 / 25 kHz
Operating Voltage	7.4V
Battery Capacity	2000 mAh
Digital Protocol	DMR Tier II
RF Output Power	VHF: 5W; UHF: 4W
Operating Temperature	-30°C to +60°C
Encryption	AES-256
GPS	Yes
Display	High-resolution LCD