116 Operating in trunked mode
1 Press Menu and select Scanning.
(Depending on how your radio is programmed, you
may be able to use a function key to turn scanning
on or off.)
2 Scroll to On (or Off) and press Select.
About emergency operation
In an emergency you may be able to summon help by
sending an emergency call. After making the call, your
radio may be programmed to enter emergency mode.
While emergency mode is active, your radio may
cycle between receive and transmit, so that your
dispatcher or the called party can hear any activity
near your radio.
On most networks, an emergency call takes
precedence over other call types, and existing calls
are cleared down so that the emergency call can
proceed.
To make an emergency call from your radio, you may
be able to either:
■ use a function key programmed for emergency
mode
■ make an emergency call using
■ the address book (see "Making a call using the
address book" on page 110)
■ a workgroup (see "Making a call to a
workgroup" on page 113)
■ a preset (see "Making a preset call" on
page 111)
■ dial the emergency call using the alphanumeric
keys
SelectBack
Main menu
Scanning
Send
To Next Page
Loading...
Need help?
General
