Operating in trunked mode 123
For a status message or a text message, select
View to read the message, Reply to reply, or Call
to return the call.
Your radio may be programmed to automatically view
status updates and text messages on receipt.
You can also delete the selected call or messages, or
delete all queued calls and messages.
Changing your queue settings
Your radio may be programmed so that you are able
to change queuing between “unanswered” and “full”.
In “unanswered” queuing, incoming individual voice
calls are only queued if unanswered.
In “full” queuing, incoming individual voice calls are
queued immediately and you don’t get an option to
answer the call.
In both cases, all status and text messages are
queued immediately.
If your radio has alphanumeric keys, you may be able
to change your call queuing setting using the keypad.
To activate “full” queuing:
■ press Menu and select Radio settings > Call
settings > Call queuing and choose On,
■ press the function key programmed for Call queu-
ing, or
■ dial *48 then press the # or PTT key.
The message Call queuing activated appears.
To change call queuing to “unanswered” queuing:
■ press Menu and select Radio settings > Call
settings > Call queuing and choose Off,
■ press the function key programmed for Call queu-
ing, or
■ dial #48 then press the # or PTT key.
The message Call queuing deactivated appears.
To Next Page
Loading...
Need help?
General
