Tait TP9300 User Manual

88 Operating in conventional mode
Sending a text message
1 When you have chosen or entered a message,
press Options and the Text options menu opens.
2 In the Text options menu, scroll through the list of
options until the choice you want appears.
3 Select Send and press Select.
4 If an address book is configured, you can select to
either dial a number or show the address book.
Otherwise a preset list of radios will appear.
The call details appear on the display.
Receiving a text message
If the radio is programmed for call queuing, incoming
text messages are added to the queue. For more
information, see "Checking the queue" on page 89.
Press Options and select whether to reply, call or
delete.
Your radio may be programmed to automatically view
text messages on receipt.
If the radio is not programmed for call queuing,
incoming text messages will not be stored or
displayed.
SelectBack
Text options
Send
Cancel sending
Send using
Dialed number
Address book
Back Select
Call alert
Richard
John
Send toCancel

Tait TP9300 Specifications

General

IP Rating	IP67
Frequency Bands	VHF: 136-174 MHz, UHF: 400-470 MHz
Power Output	VHF: 5W; UHF: 4W
Battery Life	Up to 14 hours
Channel Spacing	12.5 / 25 kHz
Operating Voltage	7.4V
Battery Capacity	2000 mAh
Digital Protocol	DMR Tier II
RF Output Power	VHF: 5W; UHF: 4W
Operating Temperature	-30°C to +60°C
Encryption	AES-256
GPS	Yes
Display	High-resolution LCD