118 Operating in trunked mode
2 In the Set workgroup menu, scroll through the list
of workgroups until the workgroup you want
appears.
3 Press Select.
4 Check that the network icon appears on the
display.
Making a call to a workgroup
Different types of calls may be associated with your
workgroups. These calls can be any types of calls.
To make a call to a workgroup:
1 Select the required zone. See "Selecting a zone"
on page 117.
2 Select the required workgroup. See "Selecting a
workgroup" on page 117.
3 Press the PTT key, and a call to that workgroup is
made.
Dialing a workgroup call
This feature is only available for radios with
alphanumeric keys.
It may be possible to dial workgroup calls, if you know
the number associated with the workgroup.
1 Dial w, where w is the number of the workgroup.
If your workgroup call number is the same as a call
to another radio, then you need to dial a leading 0.
For example, dial 23# to call radio 23 and dial 023#
for workgroup call number 23.
2 Press Send or the # or PTT key.
While the call is being setup, you can cancel the
call by pressing Cancel.
23
SendClear
To Next Page
Loading...
