4-6. Firmware Upgrade
4. Using the TAJIMA USB Linker
Press MODE Key.
You must save the firmware “usblink2.rom” in your USB Stick.
Korea Tajima’s website “http://www.koreatajima.com” will supply
the firmware file.
Turn on the TAJIMA USB Linker.
Then the left screen will be displayed.
Insert a USB Stick.
And press SET Key.
Process is upgraded.
When it is finished, turn off and on
the power of the TAJIMA USB Linker.
22
TAJIMA USB Linker Manual
To Next Page
Loading...