What to do if I get a 'USB READ Error' on my TAJIMA Sewing Machine Accessories?
If you encounter a 'USB READ Error' with your TAJIMA Sewing Machine Accessories, it typically happens during communication with the machine. The suggested solution is to RESET and Re-Input.
Why does my TAJIMA Sewing Machine Accessories show a 'USB EXTRACT' error?
The 'USB EXTRACT' error on your TAJIMA Sewing Machine Accessories occurs when the USB stick is removed during the reading process. To resolve this, RESET and Re-Input.
General| Category | Sewing Machine Accessories |
|---|---|
| Compatibility | TAJIMA embroidery machines |
| Connectivity | USB |
| Interface | USB |
| Supported OS | Windows |
| Function | Data transfer between embroidery machine and computer |
Lists all compatible Tajima embroidery machine models for the USB Linker.
Specifies the embroidery file formats accepted by the USB Linker.
Details requirements for USB flash memory, including formatting and capacity.
Provides critical warnings for safe operation and handling of the USB Linker to prevent damage or injury.
Step-by-step instructions for connecting the USB Linker to machines via parallel or serial ports.
Describes the visual interface and elements of the USB Linker's display screen.
Details the purpose and operation of each button on the USB Linker control panel.
Outlines the sequence of operations from power-on to file detection and selection.
Guides users on configuring the correct machine type for optimal compatibility and data transfer.
Step-by-step guide for upgrading the USB Linker's internal software using a USB stick.
Specific steps for loading designs from the USB Linker onto TMEF series embroidery machines.
Procedures for calling and transferring designs on TMEG and TMLG series machines.
Instructions for TMEF, TMLE, TME-DC, TMFD, TLFD, TFKN(SOP) series machines.
Steps for transferring designs to TMFX, TMEX-C, TMLH, TMCE, TEHX-C/TFHX(SOP) series.
Guide for loading designs on TEHX-C/TFHX/TFGN (Windows CE) series machines.
Instructions for calling and transferring designs on TEJT-C series embroidery machines.
Lists common error codes, indications, troubles, and their management procedures.
Explains how to resolve less common issues and operational glitches with the USB Linker.
To Next Page