TAJIMA USB LINKER - TAJIMA USB Linker Features; Supported Embroidery Machine Models; Accepted File Types; USB Flash Drive Requirements

1. Features
TAJIMA USB Linker is able to transfer the design data stored in a
USB
Sti k
t
Tji
Ebid M hi
USB
Sti
c
k
t
o a
T
a
ji
ma
E
m
b
ro
id
ery
M
ac
hi
ne.
Moreover, reliability and transmission speed are improved in
comparison with the similar solutions using FDD.
- TAJIMA USB Linker is available to refer to “directory” in USB
Stick and users are enabled to manage the designs easily.
TMEF, TMEG, TMLE, TMLG, TME-DC, TMFD, TMFX,TMEX-C, TMCE, T
MLH, TLFD, TEHX-C/TFHX (SOP/LCD by Windows CE),
TFKN (SOP), TFGN (LCD by Windows CE), TEJT-C
or Models equipped with Parallel/Serial Port
1-1. Supported Models
or
Models
equipped
with
Parallel/Serial
Port
.
1-2. Supported file types : *.DST (TAJIMA)
1
3 USB Stick to se
<Note: Storing Capacity>
Any type of USB Flash Memories, commercially available in the market.
USB Stick should be formatted in FAT32 or FAT16 before using.
1
-
3
.
USB
Stick
to
u
se
256MB : 85,000,000 stitches
512MB : 170,000,000 stitches
1GB : 340,000,000 stitches
2
GB :
68
0 000 000 stitches
2
GB
:
68
0
,
000
,
000
stitches
4GB : 1,360,000,000 stitches
TAJIMA USB Linker Manual
2