Takagi GS-2600W-AU User Manual

2
CONTENTS
IMPORTANT ...........................................................2
FOR THE INSTALLER .............................................2
FOR THE SERVICER ...............................................2
FOR THE PLUMBER ..............................................3
SPECIFICATIONS .....................................................3
INTRODUCTION......................................................4
DIMENSIONS AND CONNECTION POINTS .............. 5
SAFETY GUIDELINES ............................................... 6
INSTALLATION ........................................................ 7
CONFIRM THE APPLIANCE SUITABILITY ...............7
ABOUT SELECTING INSTALLATION LOCATION ......8
CLEARANCES FOR OUTDOOR
HEATER LOCATIONS – AS5601 ............................. 9
GAS CONNECTION ................................................ 10
SIZING AND CONNECTING ..................................10
MEASURING INLET GAS PRESSURE
AND TESTING GAS LEAKAGE ............................... 11
WATER CONNECTIONS ......................................... 12
ELECTRICAL CONNECTION ...................................13
REMOTE CONTROLLER (OPTIONAL) ....................14
REMOTE CONTROLLER INSTALLATION ...............15
CONNECTION OF REMOTE CONTROLLER
WIRING TO THE WATER HEATER ........................ 16
INITIAL OPERATION ..............................................17
NORMAL OPERATION ...........................................18
WITHOUT REMOTE CONTROLLER ....................... 18
WITH ONLY MAIN
REMOTE CONTROLLER ........................................18
WITH MULTIPLE REMOTE CONTROLLERS ...........19
FREEZE PREVENTION ............................................20
WINTER SHUT DOWN ..........................................20
MAINTENANCE AND SERVICE ............................... 21
UNIT DRAINING and FILTER CLEANING ............... 21
GENERAL TROUBLESHOOTING .............................22
PCB ERROR CODES ................................................24
WIRING DIAGRAM ................................................25
OPERATING SAFETY ..............................................26
WATER FLOW AND
WATER TEMPERATURE ..........................................28
WARRANTY CONDITIONS .....................................28
IMPORTANT
This User Guide has been prepared for Installers and Servicers of the equipment. Please keep it in a safe
place for future reference.
FOR THE INSTALLER
The installaon must be done in accordance with the informaon supplied in this User Guide. All other
relevant Naonal, State or Local regulaons must also be conformed with and these include (but are not
limited to):
• Australian Standard AS3500.1 – Water Supply
• Australian Standard AS3500.4 – Hot Water Supply
• AustralianStandardAS3000–ElectricalInstallaons
• AustralianStandardAS5601–GasApplianceInstallaon
• LocalWater,Gas&ElectricalAuthorityRegulaons
• Municipal Building Codes
FOR THE SERVICER
Maintenance and fault-nding must be done in accordance with these instrucons and the applicable
regulaons listed above.
WARNING
Installaon and service must be performed by a qualied installer (for example, a licensed
plumber or gas er).

Takagi GS-2600W-AU Specifications

General

Brand	Takagi
Model	GS-2600W-AU
Category	Water Heater
Language	English