6-5
TROUBLESHOOTING
IF THE ENGINE OVERHEATS
Remedy procedure
1. Park the machine in a safe place.
2. Check if steam is coming out of the closed
engine hood.
3. If there is steam, stop the engine
immediately and contact your sales or
service dealer for repair. If steam, is not
coming out run the engine at low idle and
let the water temperature cool down.
4. When the water temperature gauge
needle drops in the green zone, stop the
engine.
5. Perform the inspections and the remedies
listed below once the engine cools down.
· V belt slack ............. Adjust
Refer to page 5-30.
· Coolant level ........... Add
Refer to page 5-20.
· Water leakage ......... Repair
· Radiator fins ............ Clean
Refer to page 5-42.
· Sediment in cooling system
............................... Clean
Refer to page 5-57.
If the problem persists after the above
remedies, contact your sales or service
dealer for repair.
To Next Page
Loading...
