Takeuchi TB1160W User Manual

2-26
CONTROLS
MULTI-INFORMATION DISPLAY
........ Auto-cruise is on.
This lamp turns on when the auto-cruise
button is pressed. It remains lit as long as
the auto-cruise is on.
Refer to “Auto-cruise button” on page
2-40.
T. Upperstructure position indicator lamp
(traveling mode)
This lamp lights if the upperstructure and
the undercarriage become misaligned to
the right or left while traveling.
S. Auto-cruise indicator lamp
(Traveling mode)
14.
Warning lamps
IMPORTANT: If a warning lamp flashes
and an alarm is sounded, immediately
stop all operations and check the
corresponding component.
Refer to “If a warning lamp flashes” on
pages 6-12 and 6-13.
a. ECM warning lamp
This warning lamp flashes if the Electronic
Control Module (ECM) detects an engine
problem while the starter switch is in the
ON position. The problem detected is
recorded as an ECM error.
Refer to “Engine error code list” on pages
6-16 to 6-19.
a’. Vehicle and engine emergency lamp
This lamp flashes and an alarm sounds if
there is a problem with the machine. Go to
the (5) Data /Error code display from the
Menu screen, get the vehicle or engine
error code number, and consult your sales
or service dealer referring to the “Vehicle
error code list” or “Engine error code list” in
this manual.
Refer to “Menu screen” on page 2-28.
Refer to “(5) Data /Error code display” on
page 2-31.
Refer to “Vehicle error code list” on page
6-14 to 6-15.
Refer to “Engine error code list” on pages
6-16 to 6-19.
b. Battery charge warning lamp
This lamp flashes and an alarm is sounded
if a problem rises in the charging system
while the engine is running.

Takeuchi TB1160W Specifications

General

Brand	Takeuchi
Model	TB1160W
Category	Excavators
Language	English