How to adjust the top margin on Tally Dascom 1145 Printer?
If the top margin is wrong on your Tally Dascom printer, check the application's top margin setting. If necessary, adjust the Top Margin setting in the Page Setup menu.
How to stop Tally Dascom Printer from overprinting on the same line?
If your Tally Dascom printer is overprinting on the same line, change the Auto CR setting in the System Setup menu to No.
How to fix double spaced lines on Tally Dascom 1145?
If lines are double spaced instead of single spaced on your Tally Dascom printer, change the Auto LF setting in the System Setup menu to No.
How to make Tally Dascom 1145 start at the left margin?
If the next print line starts where the previous line ended instead of at the left margin on your Tally Dascom printer, change the Auto CR setting in the System Setup menu to Yes.
Why does paper slip off the tractors on Tally Dascom 1145?
If paper slips off the forms tractors or the perforated holes of the paper tear during printing with your Tally Dascom printer, ensure the forms tractors are positioned correctly for the width of your paper and that the perforated holes of the paper fit directly over the tractor pins.
What does paper select lever error mean on Tally Dascom Printer?
If paper is loaded and the paper select lever is moved to the incorrect position on your Tally Dascom printer, the printer turns offline, and the buzzer sounds continuously. Switch the paper select lever back to its correct position.
Procedure for safely removing the printer from its packaging and checking contents.
Guidance on selecting a suitable location and positioning the printer for optimal use.
Identification and description of the various physical components of the printer.
Step-by-step instructions for installing the printer's ribbon cartridge correctly.
Instructions for attaching the single sheet feeder mechanism to the printer.
Details on connecting the printer to a computer using various interface cables.
Steps for connecting the printer to a power source and checking voltage settings.
Guide for installing the necessary printer driver software for Windows operating systems.
Instructions on how to adjust the print gap lever for different paper types and thicknesses.
Guide for loading and using single sheets of paper via the friction feed mechanism.
Instructions for loading and using continuous fanfold paper with the tractor feed system.
Guidance on positioning continuous paper for optimal feeding and to prevent jams.
Explanation of the meaning and function of the printer's LED status indicators.
Description of the functions associated with each button on the printer's control panel.
Overview of the different operational states (Online, Setup, Power On) and their functions.
Details on operations and functions available when the printer is in the Online state.
Information on font selection and micro paper feed operations within the Setup state.
Explanation of functions accessible during printer startup, like Hex-dump and firmware updates.
Configuration options for language, emulation, auto CR/LF, and print direction.
Settings related to paper length, margins, auto-loading, and skip perforation.
Configuration options for Plug and Play and USB ID settings for printer interfaces.
Settings for character tables, international character sets, fonts, and code pages.
Miscellaneous settings including form length control, print speed, and pitch control.
Parameters for positioning and printing with pre-printed black marks on fanfold forms.
Procedure to adjust bi-directional alignment for grid reports to correct misalignments.
Instructions to reset all printer settings back to their original factory default values.
Procedure to measure and set the custom form length for single sheets.
Steps to adjust the Top Of Form (TOF) position for cut sheet paper.
Process for setting the bottom margin for cut sheet paper.
Instructions to adjust the left margin for cut sheet paper.
Customization of form length, TOF, bottom, and left margins for fanfold paper.
General guidance on cleaning the printer housing, cover, and internal parts.
Detailed steps for cleaning the printer's exterior and interior, including paper bail rollers.
Procedure for cleaning the printer's platen and paper bail rollers to ensure proper paper feed.
Common issues related to print quality (light, dark, smears) and their resolutions.
Solutions for problems like paper not loading, jamming, or slipping off tractors.
Troubleshooting for issues like power not turning on or the printer not printing.
Guidance for handling unresolvable printer hardware issues.
Interpretation of error codes indicated by the printer's LED lights.
Information on using Self-Test, Hex-dump, and print alignment adjustment functions.
Steps and recommendations for updating the printer's firmware.
Details on print technology, speed, font matrix, and proportional spacing.
Specifications for print head, graphics, paper feed, resolution, fonts, barcodes, code pages, and character sets.
Information on paper types, handling methods, and copy capabilities.
Details on emulation, ribbon, drivers, interface, noise, dimensions, power, and certifications.
Pin assignment details and connector diagram for the parallel interface.
Specifications for the USB interface, including connector type and speed.
Pin assignment and wiring diagrams for the serial interface connection.
Tables displaying standard, IBM, OCR-A, and OCR-B character sets.
List of ESC R parameters for various code pages supported by the printer.
Summary of ESC/P2 emulation commands and their corresponding functions.
Summary of IBM emulation commands and their corresponding functions.
General| Interface | Parallel, Serial, USB |
|---|---|
| Print Method | Serial Impact Dot Matrix |
| Paper Handling | Tractor feed |
| Emulation | IBM ProPrinter |
| Noise Level | 55 dBA |
| Number of Pins | 24 |
To Next Page
