]
OK
NO
ALWAYS LEAVE THE PISTON IN THE BOTTOM OF THE MEAT CYLINDER ONCE
YOU HAVE FINISHED USING THE MACHINE.
PRES.
T - 2467
NOTICE: This cap is for transport purposes only!. Before operating the
machine, replace it with the enclosed depressurized oil cap/dipstick.
13
400/230 V dual-voltage machine factory preset to:
Machine must be properly grounded and/or connected to a circuit leakage breaker.
WARNING • ATTENTION •
3x400 V • 50 Hz
www.talsaparts.com
www.davisonsbutcher.com
To Next Page
Loading...
