EC-DECLARATION OF CONFORMITY
The manufacturer:
TALSABELL S.A.U., Polígono Industrial V. Salud, 8, E-46950 Xirivella (Valencia), Spain
hereby certifies that the following described machine in its conception, construction and form put by him into circulation is in accordance with the
directives of the European Community regarding health and safety requirements. This declaration is no longer valid if the machine is modified without
the manufacturers consent.
Generic Denomination: Hydraulic Filler
Function: Meat Filling Machine
Type/Model: H15, H20, H26, H31, H42, H52
Serial number: please refer to the plate on the machine
Applicable Directives of the European Union:
Machine Directive 2006/42/EC.
Low Voltage Directive 2006/95/EC.
Electromagnetic Compatibility Directive 2004/108/EC.
Applicable Harmonised Standards:
EN 1672-2:2005+A1:2009: Food processing machinery - Basic concepts - Part 2: Hygiene requirements.
EN 60204-1:2006: Safety of machinery - Electrical equipment of machines - Part 1: General requirements.
EN ISO 12100:2010: Safety of machinery - General principles for design - Risk assessment and risk reduction.
EN 61000-6-2:2005: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments.
EN 61000-6-4:2007+A1:2011: Electromagnetic compatibility (EMC) - Part 6-4: Generic standards-Emission standard for industr environments.
EN 12463:2004+A1:2011: Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements.
Authorized person for the technical documentation:
Pablo Escribano, TALSABELL S.A.U., Polígono Industrial V. Salud, 8, E-46950 Xirivella (Valencia), Spain.
Valencia, 1
st
October 2013
Joseph Belloch
Health & Safety Manager
www.talsaparts.com
www.davisonsbutcher.com
To Next Page
Loading...
