Tascam CD-GT2 - Adjusting Playback and Guitar Input; Tempo Control; Connecting a Guitar

IMPORTANT SAFETY INSTRUCTIONS
13 TASCAM CD-GT2
Quick Start Guide—Basic Operation
Adjusting the volume
Use the PHONES VOLUME (+, –) keys to adjust the head-
phones volume.
Changing playback tempo
Press the TEMPO key to open the TEMPO CHANGE screen.
With the TEMPO value selected as shown below, use the
VALUE (+, –) keys to change the tempo value.
When the product is shipped new, the VSA function is ON,
allowing tempo to be changed without changing the pitch.
NOTE
To change the pitch along with the tempo, use the ¶
CURSOR key on the TEMPO CHANGE screen to select
the FIX PITCH item, and then use the – VALUE key to
select VSA OFF.
Playing guitar
Connecting a guitar
Connect a guitar to the GUITAR/MIC IN jack on the front of
the unit. Before connecting, turn the INPUT dial next to the
jack down to 0. Turn the volume up after connecting.
Guitar
NOTE
You can also connect a mic to this jack. Switch to mic
input mode in this case. (See “Setting the input” on page
29.)