67
Recovery pump (optional)
Emptying at high altitudes:
Removing and cleaning the brush
Cleaning the machine
Storing / parking the machine (not in operation)
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
• The machine must be switched on.
• Direct the drain hose to a drain or into a bucket.
• Press the button at the drain water pump.
Notice:
It is now emptied to the riser pipe in the re-
covery tank.
Notice:
Clean the brush whenever cleaning work
is completed.
• The machine must be switched off.
• Remove the key and actuate the stopping brake.
• Slightly lift the brush unit.
• Rotate the left tool clockwise and the
right tool counterclockwise, away
from the tool connection.
• Clean the tools under running water.
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Notice:
The machine must be switched off and the
key must be removed.
Notice:
Store the machine with a lifted squeegee,
lifted brush and open tank lid. Thus, the
tank can dry,
and the generation of mold and unpleas-
ant odors is prevented.
Attention:
Never store the machine with discharged
batteries. Otherwise, the batteries will be
damaged beyond repair.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
◊
◊◊
◊◊◊
⊗
Page
Loading batteries ● 62
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
●62
Draining and cleaning the recovery and
fresh water tank (Flextank)
●66
Clean the recycling filter (option) ●
Check the intake and suction filter for
contaminations and clean them
●
Clean all yellow marked parts ●
Clean the brushes ● 67
Clean the suction nozzle, check the
blades for wear and change them, if
necessary
●66
Clean the machine with a moist cloth ● 67
Clean the probe (recovery tank) and
check functionality
●
Clean the gasket of the tank cover,
check them for cracks and replace
them, if necessary
●
Maintenance and service program car-
ried out by Diversey service techni-
cians
●
• In order to maintain operational safety and
readiness for use, the machine must be ser-
viced whenever the maintenance indicator
lights up (factory setting is 650 working
hours) or at least once a year.
EN