Taski swingo 2500 Instructions For Use

64
Dosing:
Dosing examples:
Pre-cleaning
Beginning work with the machine
Manual program start
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Attention:
The use of inappropriate products (e.g.
products containing chlorine or acid) may
damage or destroy the machine.
Information on the package
of the product
Tank capaci-
ty
Product vol-
ume per tank
filling
0.5% 50ml for 10l
of water
92l 0.46l
1% 100 ml for 10l
of water
92l 0.92l
2% 200 ml for 10l
of water
92l 1.84l
3% 300 ml for 10l
of water
92l 2.76l
• Fill the appropriate product into the dosing cup and pour
the content into the fresh water tank (Flextank). Repeat the
procedure until the required dosing is reached.
• The dosing cup remains in the Flextank after dosage.
Notice:
TASKI offers an automatic dosage feature
as an option. It is possible to mount it addi-
tionally. Please contact your customer ser-
vice.
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro -
tating tool, and thereby cause injuries to
people and damage to the environment.
Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Notice:
When operating the machine, always
place both hands on the steering wheel to
ensure a safe operation of the machine.
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
• Sit down on the driver seat.
• Switch on the machine (key switch).
The display lights up briefly.
• Release the stopping brake.
Notice:
The cleaning program last used is saved in
the memory.
• Press the Suction unit ON/OFF but-
ton.
The display lights up, the suction mo -
tor starts and the suction nozzle is
automatically lowered to the operat -
ing position.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start
-
ed when the brushes rotate.
• Select the desired dosing by press-
ing the +/- buttons from level 1-7.
Notice:
To protect the environment, you should
calculate the lowest level that is sufficient
for good cleaning results.
• Press the Brush drive ON/OFF but-
ton.
The display lights up and the brush
unit is lowered.
• Select the desired brush pressure by
pressing the +/- buttons from level 1-
4.

Taski swingo 2500 Specifications

General

Brand	Taski
Model	swingo 2500
Category	Floor Machine
Language	English