24
Controls and Systems
McDonald's Intelligap Grills
1141015
Menu Items
After the Service passcode has been entered,
changes to the Menu Items can be made.
IMPORTANT: Changing Numerical Digits in
Menu Items
When making changes to numerical digits, pressing
the keys will increase or decrease digits
in single increments. To change the digits in
increments of 10's and 100's, adjust the first digit
using the keys and then press the
key to move the cursor to the next digit.
Repeat this sequence for each digit until the correct
setting is displayed.
IMPORTANT: Exiting Programming Mode
After making and saving a menu item programming
selection, pressing the OK key exits the
programming mode immediately. If the OK key is not
pressed, the display automatically times-out after
3-5 seconds and exits the programming mode.
AM-N PM-Y
This feature is used to select the time of day the
product will be cooked, either in the AM, PM, or
both.
Step 1
After selecting the item, press the key. The
screen will display the item and “AM Y/N PM Y/N.”
10:1 - CLAM
AM N PM Y
Step 2
To change the setting, press the key
until the desired AM or PM selection is displayed.
Press the key to save the selection.
Remove In
The REMOVE IN feature is used to set an alarm to
activate when the product should be removed from
the grill.
Step 1
After selecting the item, press the key until the
screen displays “REMOVE IN __”.
10:1 - CLAM
REMOVE IN: 044
Step 2
To change the setting, press the keys
to display the correct setting for the first numerical
digit.
Step 3
Press the key to move the cursor to the next
numerical digit.
Step 4
Repeat this sequence for each numerical digit until
the correct setting is displayed.
Press the key to save the selection.
To Next Page
Loading...
Need help?
General
