Opening up the remote
To change the stick mode or changing the throttles tick ratchet, you will need to open up the remote control.
First remove the seven (7) screws on the backside and locate the area shown in the photo below. If you can’t
open up the remote control, you probably forgot the 7th screw, located inside the JR module.
Changing the flight stick mode
Depending on your stick preferences/flight mode, your throttle stick will be non-sprung. Modifying it is a
matter of screwing in a screw on one end, and removing the screw on the other end. The hardness of the
sticks and the ratchet is controlled by the silver metal piece and the two control screws, see the next section.
To Next Page
Loading...