TBS TANGO FPV REMOTE - Specifications

Specifications
Type:
All-in-one FPV Remote Control
RC system:
JR-compatible expansion module, e.g. TBS CROSSFIRE
FPV system:
5G8 VRX receiver, 40CH
Antenna:
R/C: module specific
VTX: 5G8 5dBi patch antenna, optional external SMA port
FPV Channels:
Boscam A, B, E, Fatshark, Raceband
Display:
LCD 4.2-inch, 640x480p
R/C module
compatibility:
JR-compatible RF module with CRSF or PPM stream (absolute max. ratings:
-0.3V to 15V), e.g. Crossfire, JR, FrSky and similar radio modules
Battery:
Li-Ion 18650 3.6V 6000mAh internal battery, USB-charging
Operating range:
Variable depending on output power and radio environment
Ports:
RJ45 connector for connecting video goggles, e.g. FatSharks
DSC for trainer connection
USB for software updates and charging
Controls:
2x Quad ball-bearing gimbals
2x Two-position switches
2x Three-position switches
2x Spring-loaded dials
2x Digital trims
3x Video RX buttons
1x Rocker switch
Working temperature:
0 - 40°C
Size:
150 x 80 x 20 mm
Weight:
340 grams, without R/C radio module
Kit contents:
1x TBS Tango Remote Controller
1x TBS Tango Neckstrap
1x RJ45 Audio/Video cable
3