Adjusting throttle ratchet strength
Use a screwdriver to adjust the right-most screw; counter-clockwise to decrease the tension and clockwise to
increase the tension. If you rather prefer a smooth sliding stick, increase the tension of the other metal
bracket.
Replacing battery
The battery in the radio uses a regular XT30 connector to make it easy to replace or upgrade the stock
battery. It uses Lithium-Polymer 3.7V 1S batteries, two in parallel, one on each side of the remote.
Swapping antenna
The remote comes with a 5G8 5dBi patch antenna, hidden underneath the cover on the top. You can change
the antenna or connect an external SMA connector by un-hooking the IPEX/IPX32/Hirose U.FL antenna
connector and swap to another cable.
To Next Page
Loading...