18
MAIN PAGE Inserts
Insert type selector
Select between:
- None
- Digital Radiance
- Stereo Adjust
- Dyn EQ
- Parametric EQ
- External Insert
- MS Encoding/Decoding
- Spectral Stereo Image
(Finalizer 96 only)
Insert selected
This parameter deter-
mines the drive of the
Digital Radiance
Generator
Shows the perfor-
mance of the Digital
Radiance Generator
Move cursor up to increase the stereo width
Move cursor down to make the signal more mono
Center position is normal.
Move the cursor Left/Right to adjust center (balance)
STEREO ADJUST
DIGITAL RADIANCE GENERATOR
THRESHOLD
RATIO
ATTACK
RELEASE
FREQUENCY sets the working
frequency of the Dynamic EQ
CURVE sets the frequency
characteristics of the dynamic
damping filter
DYN-EQ
INPUT I 2I 1 NORMALIZER EXPANDER COMPRESSOR LIMITER OUTPUT
To Next Page
Loading...
