TC Electronic Finalizer PLUS/96K User Manual

35
TOOLS Phase Meter (correlation)
Time/division
Curve speed
TOOLS Calibration Tone
Phase Meter
The Phase meter shows you the phase relationship
between the two channels.
Plus means that the two channels are in phase.
Minus means that the two channels are relatively out
of phase.
Time/division
Sets the curve drawing speed.
Calibration tone
In the Calibration display you have a 1000Hz
test-tone, which will be sent to the Finalizers
Outputs at the selected level.
Set the level by using the ADJUST wheel and
press OK to activate.

TC Electronic Finalizer PLUS/96K Specifications

General

Brand	TC Electronic
Model	Finalizer PLUS/96K
Category	Computer Hardware
Language	English